This is the Dell Logo This graphic produces space between objects Buy Online or Call 1-800-WWW-DELL 
Dell SAN Foundations Online Training Course
This graphic produces a rounded corner This button takes the user back to the previous pagePrevious   NextThis button takes the user to the next page.
This is a placeholder for Dell's Customer Training logo
Index
Course Overview
SAN Introduction
SAN Architecture
SAN Implementation
Dell PowerVault SAN
Hardware Components
Software Components
Validated Servers
Building the SAN
SAN Versions

Dell | EMC SAN
Hardware Components
Software Components
Building the SAN

Interoperability
PV650F Conversion
PowerVault Hardware

Section Review
Course Review
Course Feedback
Contact Dell

SAN Implementation

Section Review

Complete the following review questions.


1) Dell PowerVault SANs use which brand of Host Bus Adapter?


LSI Logic


Emulex


QLogic


FibreStar



2) For a Windows-based Dell PowerVault SAN, which of the following software packages is required? (Select all that apply)


QLConfig


Storage Consolidation (StorageC)


Access Logix


StatisPro



3) Which software package is used for binding and unbinding LUNs?


Application Transparent Failover (ATF)


Storage Consolidation (StorageC)


ARCServ


Data Supervisor



4) Dell | EMC SANs use which type of HBA?


LSI Logic


QLogic


Emulex


FibreStar



5) On a DAE, which of the following is used to make a connection?


The DAE-Connect port


Serial port


PERC


Link control card



6) Automatic Transparent Failover provides which function in a Dell | EMC SAN?


Automatically diagnoses data "traffic jams" and re-routes traffic more efficiently


Delivers automatic re-routing of SCSI or Fibre Channel I/O traffic in the event of a host-to-storage path failure.


Interprets incoming SNMP trap messages, identifies the problem array and locates the problem on the network map


Enables multiple heterogeneous hosts to connect to the Dell | EMC storage arrays.



7) Which of the following statements are true if you update a PowerVault 650F DPE to a Dell | EMC FC4700?


All existing LUNs on the 650F (and the data contained on them) will be destroyed.


Customers cannot perform this upgrade. A Dell representative must come onsite.


The fabric, hosts and supporting software must be updated.


The PowerVault 650F must have two LCCs which are connected to two SPSs.



8) Which statements are true regarding the interoperability of Dell PowerVault 56F switches and Dell | EMC SAN components?


Because the PowerVault SAN and Dell | EMC SAN must be zoned separately, file sharing between the two SAN zones is not possible.


The DELL|EMC Storage Processors cannot log into Dell PowerVault 56F switches.


Although the components are compatible, data transfer is somewhat unstable.


In order to upgrade the 56F firmware, the switch must temporarily be disabled for SAN traffic.


This graphic, located at the bottom of the page, includes navigation buttons allowing you to return to the Previous page, or continue to the Next page. The Previous button is on the left, and the Next button is on the right. Text links are available at the top right of the page.

Copyright 1999-2002 Dell Computer Corporation. All rights reserved.